FALMEC Downdraft 120 Installation Manual Download Page 20

2

0

  WARRANTY

All FALMEC rangehoods come with a 5 year parts and labour warranty. PR Kitchens & 
Washrooms will correct, free of charge, any defects in material or workmanship for the 
period of 5 years, subject to the terms of our warranty stated below.

This  warranty  will  be  void  if  a  Falmec  range  hood  is  used  for  commercial  purposes. 
Some examples of commercial purposes but not limited to, include restaurants, cafes, 
schools and clubs.

Rangehoods  in  the  Falmec  range  (excluding  BBQ  models)  are  designed  and 
warranted “strictly” for indoor use only (household kitchen).

1. This warranty only applies for products installed by a qualified person and when 
provided with a certificate of compliance in accordance with State/Territory laws.

2. This product must be used in accordance with the manufacturer’s instructions. This 
warranty does not apply should the defect in or failure of the product be attributable to 
misuse, abuse, accident or non-observation of the manufacturer’s instructions on the 
part of the user. FALMEC appliances does not accept liability for any direct or 
consequential loss, damage or other expense caused by or arising out of any failure to 
install or use the product in accordance with the manufacturer’s instructions.

3. The warranty does not cover failures due to normal wear and tear with reasonable 
use or consumable components such as globes, filters, etc.

4. PR Kitchens & Washrooms, at its own discretion may replace or repair any defective 
component(s) to affect a repair due to any faulty workmanship and material. The 
warranty does not cover breakage of outer glass panels attributed to external damage.

5. The warranty provided is a “Repair Warranty” and in an extreme event if a repair 
cannot take place, a replacement will be provided of an equivalent current model where 
the balance of the warranty period from the original date of purchase will take effect.

6.  This  warranty  is  immediately  void  if  the  serial  or  model  number  label  is  removed, 
defaced,  serviced  or  repaired  by  a  unauthorised/unqualified  personal  or  used  for 
industrial/commercial purposes.

7. Warranty will be only provided when a proof of the original purchase is presented to 
an authorised dealer or reseller before or at the time of service.

8. This warranty does not cover any corrosion or defect as a result of the product being 
installed in an environment in which the appliance is not protected from the weather.

9. It is the responsibility of the customer to ensure the appliance is easily accessible for 
a service technician to carry out required repairs. Any obstruction prohibiting access to 
the product by building materials of any kind will be required to be removed and 
reinstalled by the customer.

10. PR Kitchens & Washrooms has a service network in all metropolitan areas and most 
regional areas. Where the warranty claim has been made outside a radius of 50km from 
any store where the product can be purchased, the customer is responsible for the cost 
of delivery to the nearest service agent or the travel cost for a technician to travel to a 
location outside the 50km radius.

PRODUCT SOLD IN AUSTRALIA ONLY

:

At PR Kitchens & Washrooms our goods come with guarantees that cannot be 
excluded under the Australian Consumer Law. You are entitled to a replacement or 
refund for a major failure and compensation for any other reasonably foreseeable loss 
or damage. You are also entitled to have the goods repaired or replaced if the goods 
fail to be of acceptable quality and the failure does not amount to a major failure.

OUTDOOR USE RANGEHOODS

Outdoor  BBQ  models  from  Falmec  are  warranted  for  use  above  barbecues  and  in 
alfresco areas with one open wall and a solid roof such as that they are not exposed to 
the elements.

Outdoor  BBQ  models  MUST  only  have  the  specified  2010  m3/hr  motor  installed  in 
conjunction with the hood.

In  the  scenario  where  the  hood  is  located  near  the  ocean  or  exposed  to  salty  air, 
regular care and cleaning of the hood is recommended to prevent any corrosion.

REMOTE MOTOR RANGE HOODS

In addition to the standard 5 years parts and labour warranty stated above the remote 
motors from the Professional series are covered for an additional 5 years as a part only 
warranty therefore giving a total coverage of 10 years. This warranty is conditional by 
the following items

If installed in coastal applications the external housing must have anti-corrosive 

coating applied. The internal fan may also require additional cleaning/washdown as a 
result of exposure to salt in the air.

Fan must be installed in a position that it will not be subjected to excessive duct 

temperatures (40˚ covers all models).

Filters must be in place within the rangehood and regularly maintained/cleaned/

replaced as needed.

SUPPORT

At PRKS we place great importance on customer satisfaction and that is why we have 
established a dedicated and experienced customer support team that you can rely on.

Should  you  ever  need  to  make  a  warranty  related  enquiry  about  your  FALMEC 
product, you can lodge the enquiry at:

AUSTRALIA

www.prkws.com 

[email protected] 

03 9700 9100

NEW ZEALAND

www.prkws.com 

[email protected]

 09 964 0400

We suggest you have the following information close at hand:

1. Model number of your product

2. A copy of your original purchase receipt

3. Address details of where the product is installed.

Any relevant pictures can be attached if lodging the claim online 

Summary of Contents for Downdraft 120

























Reviews: