2.0 Description
The FallTech
(R)
DuraTech
TM
Mini SRL-P is a personal self-retracting device for those working at height and may be subject to fall hazards. This product
is not suitable for applications with leading edge exposures where the lifeline of this device may come in contact with an edge during a fall event.
This product is a personal SRL and may be used with the SRL housing side connected to the anchor or connected to the full body harness. Contact
FallTech for more information or product selection questions.
This manual includes one Appendix containing figures and tables specific to the DuraTech Mini SRL-P discussed in this manual.
The SRL discussed in this manual may be attached to an overhead anchorage, i.e., from directly over the user’s head, or to an anchorage at a maxi-
mum of 5’ below the user’s FBH dorsal D-ring. Below D-ring tie-off is outside the scope of ANSI Z359 and is only allowed when no edge hazards are
present. At no point during a fall shall the lifeline be loaded over any edge.
As shown in Figure 1 below, the DuraTech Mini has a nylon housing that contains a Dyneema
(R)
synthetic lifeline wound onto a spring tensioned
drum. The DuraTech Mini lifeline is equipped with an energy absorber and a leg-end connector. When the user is attached, the lifeline extends and
retracts with the user movement, automatically maintaining taut lifeline. If a fall occurs, a centrifugal pawl system engages, stopping the lifeline
payout. Then, the inline Energy Absorber (EA) will deploy, gradually slowing and arresting the fall.
See Table 1A in Appendix A for product, material, and performance specifications.
102022
MSRD07 Rev F
4
D
E
Energy Absorber
Leg-end Connector
J
Figure 1: About DuraTech Mini SRLs
A
F
C
H
B
G
Integral Swivel Eye
Triple-lock Carabiner
Web Lifeline
Alignment Clip
Unit Housing
Carabiner Body
Triple-lock Gate
