●
= available as optional equipment
○ = standard equipment - = not available Explanations of the footnotes – page 31
24
Standard equipment 118
Base Line
Li
s
t p
ric
e
5
Eu
ro
e
x
c
l.
VAT.
Bas
e
L
in
e
Sound adjustment -
analytic/warm
Adjustment of the sound image to your acoustic preferences and
conditions by adjustable damping of the spike shoes. Stone floors,
certain audio components, or living room conditions can create a too
hard, rigid, or even over-analytical sound. Therefore, it is possible to
insert a plastic ring into the floor plate. Otherwise, the stainless-steel
floor plate rests directly on the floor. The damping can be adjusted
individually for each stand and this results in a different
damping/coupling for each shelf.
○
EQUIPMENT
SOUND-CORE
Stands incl. spikes
2 pcs.
Made of highly homogenous, cast aluminum EN AW-5083 in natural
E6/C0 anodized.
Raw aluminum is rather soft and therefore absorbs resonances well and
can distribute and transmit them very evenly due to its ordered
microstructure. When the surface is finished with anodizing, a hard layer
is created which makes the aluminum resistant and at the same time
very conductive to sound. This enables extremely fast transmission of
vibrations and resonances and at the same time a certain and desired
damping This combination cannot be found in any other material in such
a balanced way.
Spikes made of stainless steel 1.4305
○
Shelf
1 pc.
Composite shelves with innovative integrated connection technology.
A shelf is conductively connected to exactly one stand and insulated
with the other 3 stands, thereby vibrations from one shelf cannot
influence any other shelves. This leads to the perfect transmission of
the micro-vibrations created by the electronics and to the high stiffness
of the sound-core
○
Spike shoes
4 pcs.
Ground plate milled out of stainless steel 1.4305. Optional plastic ring
made of highly damping molded polyamide which has a high
mechanical load capacity and good damping characteristics
○
