●
= available as optional equipment
○ = standard equipment - = not available Explanations of the footnotes – page 31
9
Standard equipment 118
Genium Line and Pure Line
Li
s
t p
ric
e
5
Eu
ro
e
x
c
l.
VAT.
G
e
ni
um
L
in
e
Pure
L
in
e
TECHNOLOGY
Compound-Shelves
Multi-layer structure made of MDF and aluminum with a special
adhesive.
○
○
3D/1O Technology
–
vibrations decoupling
For us, the art of a dynamic sound image lies in deriving micro-
vibrations in the best possible way and damping them as little as
possible. The new, innovative connections of the FalkenOhr
shelves to the stands are either damping or conductive. This
enables the micro-vibrations generated by the audio devices in
one shelf to be dissipated without disturbing the other levels.
Your benefit:
The micro-vibrations of the electronics are
dissipated in a targeted and extremely fast manner and the
devices are decoupled from each other, this leads to a highly
dynamic and precise sound image.
○
○
3D/1O Technology
–
electromagnetic
decoupling
The aluminum layers make it possible to discharge and shorten
the voltage induced by the electromagnetic fields of the audio
components. Therefore, the electromagnetic interference between
two layers is drastically reduced.
Your benefit:
The reduced interferences lead to a significant
increase in precision and clarity of sound.
○
○
Sound adjustment -
analytic/warm
Adjustment of the sound image to your acoustic preferences and
conditions by adjustable damping of the spike shoes. Stone floors,
certain audio components, or living room conditions can create a
too hard, rigid, or even over-analytical sound. Therefore, it is
possible to insert a plastic ring into the floor plate. Otherwise, the
stainless-steel floor plate rests directly on the floor. The damping
can be adjusted individually for each stand and this results in a
different damping/coupling for each shelf.
○
○
Shelves can be
rearranged in a grid of
25 mm
Each shelf can be rearranged individually at any time in a 25 mm
grid.
○
○
