03
04
1.
Please plug the camera in with the
included power supply, and connect the
camera to your router with the included
Ethernet cable.
Router
2.4GHz
Plug in
2.
Open the Faleemi App,
Click on
[Add Camera]
.
Faleemi
VIEW-1234567-ABCDE
4.
Click on
[LAN Search]
.
5.
Click on the camera searched.
3.
Click on
[Add the cameras which are
already connected to your WiFi
network]
.
6.
Give your camera a name, and input
Password 123456,
click on
[ ]
.
It will take you to the home page.
If you don’t find it, please read below tips
If you don’t find it, please read below tips
1. Please make sure your phone is connected
1. Please make sure your phone is connected
to your WiFi (not cellular data)
to your WiFi (not cellular data)
2. Please change to another LAN port and try
2. Please change to another LAN port and try
again.
again.
3. You may try with another Ethernet cable.
3. You may try with another Ethernet cable.
After you check all the above points, and
After you check all the above points, and
then click on this icon to refresh.
then click on this icon to refresh.
Please use the default username of
Please use the default username of
admin
admin
and password of
and password of
123456
123456
here.
here.
You can change them when the camera is all
You can change them when the camera is all
set up. You will find the instructions in
set up. You will find the instructions in
Page 26
.
Setup Option A: Step 1 / Add the cameras via Lan Search
Smart Reliable Secure
Smart Reliable Secure
Quick Start Guide
HD Weatherproof WiFi Security IP Camera
Model: FSC761
