D)
技术参数
Specifications:
型号
Model no.
：
工作电压
Ba�ery Voltage
AAx 3
遥控距离
Remote distance
20 M
频率
Frequency
2.4GHz
尺寸
Size (LxWxH)
显示屏
LCD Display
重量
Weight
RC-5
180x55x20mm
183 g
E)
使用注意事项
Attention
F) FCC Warning Statement
1.
非专业人士，请勿随便拆卸，否则后果自负。
2.
使用环境应保持干燥、通风注意防潮防水。
3.
请避免硬物将其划伤以至影响使用效果。
4.
使用产品时，请详细阅读说明书。
1.Make sure the power is off a�er use.
2.Since there can be high voltage inside the unit, Do NOT open or repair the unit yourself. If there is any
defect, please contact an experienced technician.
3.Keep the environment dry and ven�lated when using the product. Do not leave or use the flash in humid
or dusty environment.
4.Do NOT apply pressure to the product.
5.Read this manual carefully before using the product.
RC-5
说明书
Instruction Manual
感谢您选购锐鹰公司的产品！
如欲了解更多相关产品的信息，请联系您当地的经销商或访问我们的
网页。使用产品之前，请先仔细阅读说明书。
Thank you for purchasing FalconEyes’ products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.hk
Thank you.
Please read this manual carefully before using this product.
E-mail: [email protected]
Website: www.falconeyes.com.hk
√
Changes or modifications not expressly approved by the party responsible for compli
-
ance could void the user’s authority to operate the equipment. This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interfer
-
ence by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
