Falcon E9541, User, Installation And Servicing Instructions, Page: 28 / 29

28
8.0 FAULT FINDING
FAULT POSSIBLE CAUSES REMEDY
No power (red neon
extinguished) Appliance disconnected from
mains power
Reconnect to mains power
No heat when thermostat
turned on (amber neon
extinguished) Appliance internal fuse blown Investigate reason, rectify
fault, replace fuse
Faulty thermostat Replace
Safety thermostat tripped Reset/investigate reason
No heat when thermostat
turned on (amber neon
illuminated) Faulty contactor Replace
Faulty element Replace
Appliance not hot enough Faulty thermostat Replace.
Note: when checking plate
temperature, probe 210mm
in from each side halfway
between front and rear on
E9581 models. Probe centre
plate on E9541 models
9.0 SPARE PARTS
Mains Pilot light RED 730962010
Circuit Pilot light AMBER 730962040
Element 230V 733620006
Thermostat E9581/81R/41/41R 731910500
Thermostat E9581CR/41CR 733630002
Safety thermostat E9581CR/41CR 733630003
Control knob E9581/81R/41/41R 733620005
Control Knob E9581CR/41CR 733630004
When ordering spares, quote the following:
Model Number
Serial number
Gas Type
This information is found on data plate on front panel. (see section 1.0)
Visit our website for further spares information.