Falcon E9541, User, Installation And Servicing Instructions, Page: 19 / 29

19
7.5.1 Remove control panel as shown in 7.1
7.5.2 Remove safety thermostat fixing screws.
7.5.3 Remove the wires from the safety thermostat, noting the wire numbers.
7.5.4 Remove element tray as shown in 7.2
7.5.5 Loosen nuts on phial clamps.
7.5.6 Carefully pull phial forward free of the clamp.
7.5.7 When replacing the phial ensure you re-fit the vidaflex sleeve to the capillary, the
capillary is supported in the two guides and the phial is pushed fully in until it hits the
end of the phial clamp before fully tightening the clamp nuts.
7.6 SAFETY THERMOSTAT RESET (CHROME GRIDDLE ONLY)
Allow the griddle plate to cool down prior to resetting the thermostat.
7.6.1 Remove control panel as shown in 7.1
7.6.2 Push in the red reset button with your finger.
NOTE: Reset button is sensitive. Do not use excessive force.
IF THE SAFETY THERMOSTAT HAS ACTIVATED, THE REASON FOR
OVERHEATING MUST BE IDENTIFIED AND REMEDIED BEFORE
RETURNING THE UNIT TO SERVICE
Replace all parts in reverse order