Sending and Receiving Data
Advanced User’s Guide
3-9
Send File (to Portable)
1.
Select
Transfer Files > Send File
from the menubar.
Figure 3-6: Send File to Portable Window
2.
Select the file(s) to send.
z
You can select multiple files if you are using the
ZModem
protocol.
3.
Click
Open
to send the file to the data collection terminal
z
Press
Cancel
to not send any files
Receive File (from Portable)
When receiving files from a data collection terminal, a prompt appears. Enter
the name of the incoming file.
1.
Select
Transfer Files > Receive
from the menubar.
If the
Path/Filename Transmission
is set to
Specify Receiver’s File/Pathname
, the file
names may be altered prior to being sent to the receiver. A
Send File As...
dialog is
displayed to permit the changing of the path/name of each file. The dialog contains a
list of each file to be sent. The left column displays the path/name of each file as it
exists on this computer. The right column displays the same file as seen by the
receiver. To change the path/name assigned to a file, select the filename to change,
and then click
Edit
. Or, double-click the filename from the list.
advuser.book Page 9 Friday, September 27, 2002 4:22 PM
