manualshive.com logo in svg

Falcon DOS Portable Data Terminals, Advanced User'S Manual, Page: 144 / 184

Share
Download
Falcon DOS Portable Data Terminals Advanced User'S Manual Download Page 144

B-16

Falcon

®

 DOS Portable Terminals

Syntax

HELP <

command

>

Remarks

HELP

 serves as a memory aid. For complete information about ROM-DOS 

commands, always consult this manual.

HELP for each command can also be displayed by entering 

/?

 following the 

command name.

The file 

COMMAND.HLP

 must be available to use this command.

Examples

To list the help of the 

DIR

 command, type:

HELP DIR

or

DIR /?

All available batch file commands are also listed by 

HELP

.

NEWFILE

Type

CONFIG.SYS

Purpose

The 

NEWFILE

 command allows continuation of 

CONFIG.SYS

 file 

processing from a new file. The file can be located on in another directory or 
even on a different drive.

Syntax

NEWFILE=

filename

Remarks

The 

NEWFILE

 command is especially useful when the 

CONFIG.SYS

 file is 

located on an inaccessible drive or in ROM. Additional device drivers or 
instructions can be added easily to the new file and will be processed along with 
the main 

CONFIG.SYS

 file upon starting the system.

When the 

NEWFILE=

 instruction is processed, control will be passed from the 

present file (the one containing the 

NEWFILE

 instruction) to the file specified 

in the command. Any commands placed after the 

NEWFILE

 instruction in the 

original file will not be processed. If for some reason the specified file name can 
not be located, 

CONFIG.SYS

 processing will be terminated (even if 

advuser.book  Page 16  Friday, September 27, 2002  4:22 PM

Summary of Contents for DOS Portable Data Terminals

























































































































































































Reviews:

No comments