20
7.3 SAFETY THERMOSTAT RESET
7.3.1 If the appliance unexpectedly turns off, the safety thermostat might have activated. To
reset follow the instructions below:
7.3.2
Turn Temperature Control to “Off Position”.
7.3.3 Allow unit to cool.
7.3.4 Isolate unit.
7.3.5 Remove Control Panel as shown in 7.2.1.
7.3.6 Depress reset switch.
7.3.7 Replace Control Panel taking care not to trap wires or capilillaries.
7.3.8 Re-establish connection to supply.
7.3.9 Set Temperature Control to desired setting.
7.3.10 If elements fail to switch on, further fault finding is required.
Summary of Contents for Dominator Series
Page 24: ...23...
Page 28: ...27 7 9 CIRCUIT DIAGRAMS 7 9 1 E3741Circuit diagram...
Page 29: ...28 WIRING DIAGRAMS 7 9 2 E3741 Wiring diagram...
