Falcon DOMINATOR PLUS E3405 Installation And Servicing Instructions Download Page 1

DOMINATOR 

PLUS

 E3405 CHIP SCUTTLE 

INSTALLATION and  
SERVICING INSTRUCTIONS 
 

Caution : Read the instructions before  
using this appliance. 

 

IMPORTANT 

The installer must ensure that the installation of the appliance is in conformity with these instructions and National 
Regulations in force at the time of installation. Particular attention MUST be paid to – 
 

BS7671 IEE Wiring Regulations 
 
Electricity at Work Regulations 
 
Health And Safety At Work Act 
 
Fire Precautions Act 
 

This appliance has been CE-marked on the basis of compliance with the Low Voltage and EMC Directives for the 
voltages stated on the Data Plate 
 

WARNING -THIS APPLIANCE MUST BE EARTHED 
 

On completion of the installation these instructions should be left with the Engineer-in-Charge for reference during 
servicing. Further to this, The Users Instructions should be handed over to the User, having had a demonstration of 
the operation and cleaning of the appliance.  
 

IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE INSTALLING AND COMMISSIONING 
THIS APPLIANCE. FAILURE TO COMPLY WITH THE SPECIFIED PROCEDURES MAY RESULT IN DAMAGE OR THE NEED 
FOR A SERVICE CALL. 
 
PREVENTATIVE MAINTENANCE CONTRACT 
 

In order to obtain maximum performance from this unit we would recommend that a Maintenance Contract be 
arranged with SERVICELINE. Visits may then be made at agreed intervals to carry out adjustments and repairs. A 
quotation will be given upon request to the contact numbers below. 
 

WEEE Directive Registration No. WEE/DC0059TT/PRO   At end of unit life, dispose of appliance and 
any replacement  parts in a safe manner, via a licenced waste handler. 

 

units are designed to be dismantled easily and recycling of all  material is encouraged whenever 
practicable. 

 

 

Falcon Foodservice Equipment 

HEAD OFFICE AND WORKS 

Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland. 

 

 

 

 

 

 

SERVICELINE CONTACT 

Phone: 01438 363 000 

Fax: 01438 369 900

T100824 Ref.3 

Summary of Contents for DOMINATOR PLUS E3405









Reviews: