18
6.3.1 Turn on mains power supply on.
6.3.2 Ensure Red Neon illuminates.
6.3.3 Turn Temperature Control Knob to 280
o
C.
6.3.4 Ensure Amber Neon illuminates.
6.3.5 Let the pan heat up. When Amber Neon switches off, check the temperature in the
middle of the plate. Ensure the temperature is 280
o
C +/- 20
o
C.
6.3.6 Switch appliance off
This appliance is also provided with a terminal for connection of an
external equipotential conductor. This terminal is an effective electrical
contact with all fixed exposed metal parts of the appliance, and shall
allow the connection of conductor having a nominal cross-section area
of up to 10mm². It is located at the rear of the unit and identified by the
following label and must only be used for bonding purposes.
If the appliance does not operate correctly please refer to section 9.0 and rectify the
problem.
PLEASE FILL OUT THE INFORMATION TABLE ON THE FRONT
COVER AFTER COMMISSIONING.
7.0 SERVICING
BEFORE ATTEMPTING ANY MAINTENANCE, ISOLATE THE
APPLIANCE AT THE MAINS SWITCH AND TAKE STEPS TO
ENSURE THAT IT IS NOT INADVERTENTLY SWITCHED ON.
Summary of Contents for DOMINATOR E3741
Page 24: ...23...
Page 28: ...27 7 9 CIRCUIT DIAGRAMS 7 9 1 E3741Circuit diagram...
Page 29: ...28 WIRING DIAGRAMS 7 9 2 E3741 Wiring diagram...
