*D-2116*
D-2116
1. PREPARE INSIDE FACE OF DOOR
FOR DEVICE. SEE DEVICE
DIRECTIONS FOR LOCATIONS OF
VERT. AND DEVICE REF. CENTER
LINES.
2. PREPARE OUTSIDE FACE
OF DOOR FOR TRIM:
A. TRANSFER VERT. AND DEVICE
REF. CENTER LINES FROM
INSIDE FACE TO OUTSIDE FACE
OF DOOR. BE SURE VERT.
CENTER LINE IS PARALLEL TO
EDGE OF DOOR.
B. LOCATE AND PREPARE ALL
HOLES AS INDICATED.
3. RE-HAND TRIM IF NECESSARY (SEE
OTHER SIDE).
4. INSTALL TRIM ON DOOR AND CUT
LEVER SPINDLE TO SIZE:
A. TRIM MOUNTING: FOUR STUDS
ARE THRU-BOLTED TO DEVICE
WHEN DEVICE IS INSTALLED.
B. CUT LEVER SPINDLE:
•
VERTICAL AND THREE POINT
LATCH: LEVER SPINDLE TO
EXTEND 5/8” TO 3/4” BEYOND
DOOR SKIN.
•
MORTISE: LEVER SPINDLE TO
BE INSIDE DOOR SKIN BY 1/4”.
5. ASSEMBLE CYLINDER, IF REQUIRED.
A. IF USING MORTISE CYLINDER,
INSTALL CYLINDER TO MORTISE
LOCK.
B. IF USING RIM CYLINDER, CUT
TAILPIECE TO EXTEND 3/8”
BEYOND INSIDE FACE OF DOOR
(SEE OTHER SIDE).
6. INSTALL DEVICE ON DOOR
PER DEVICE INSTRUCTIONS.
NOTE: DIMENSIONS “A” AND “B” ARE THE SAME FOR L AND ST TRIM REGARDLESS OF FUNCTION.
“A” = 1-3/8” “B”= OMIT
“A” = OMIT “B”= OMIT
“A” = 1-3/8” “B”= 1-3/8”
(F-)18-V-L(2O.C.)
“A” = OMIT “B”= 1-3/8”
(F-)18-V-NL x L DT
(F-)18-V-L2
(F-)XX-M-L
(F-)XX-V-L
(F-)18-M-L
(F-)18-V-L
(F-)XX-M-L (NL)
(F-)XX-V-L (NL)
(F-)18-M-L (NL)
(F-)18-V-L (NL)
(F-)XX-M-NL x L DT (F-)18-M-NL x L DT (F-)XX-M-L2
(F-)18-V-L2
(F-)XX-M-L (BE) (F-)18-V-L (BE)
(F-)XX-M-L DT (F-)18-V-L DT
(F-)XX-V-L (BE) (F-)18-M-L (BE) (F-)XX-V-L DT (F-)18-M-L DT
LHR SHOWN
RHR OPPOSITE
1-1/4”
1-13/16”
3-7/8”
1/4”
7-3/4”
FOR
HEIGHT
FROM
FINISHED
FLOOR,
REFER TO
DEVICE
TEMPLATE
1-3/4”
7/8”
FOR BACKSET, REFER TO DEVICE TEMPLATE
1/2” DIA., 4 PLACES
METAL DOOR, OUTSIDE
FACE OF DOOR ONLY;
WOOD DOOR, THRU
FOR METAL DOOR ONLY (4 PLACES):
1/4” DIA. INSIDE FACE OF DOOR ONLY
“A” DIA. THRU
“B” DIA. THRU
1-1/4” THRU
DEVICE REF.
CL
VERT. CL
VERT. CL
OUTSIDE FACE OF DOOR
INSIDE FACE OF DOOR
WOOD DOOR
METAL DOOR
(Trim side only for
mortise devices)
Trims for (F)18 and (F)XX Series Surface Vertical Rod, Mortise, and Three Point Latch Devices
812L & 816L
Installation Instructions
© Allegion 2014
Printed in U.S.A.
D-2116 Rev. 01/14-b
Customer Service
1-877-671-7011
www.allegion.com/us
