2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of
Arctic Cat / Textron Wildcat XX
Soft Rear Window
AC-WILDCAT-XX-RW01
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
1.
Be sure to read these instructions thoroughly before opening and installing the Wildcat
XX Soft Rear Window. The installation is best done when the temperature is 70 degrees
F. or warmer. The temperature affects the adhesive Velcro, if conditions prevent
installing in warmer weather it helps to store the adhesive Velcro at room temperature
prior to installation.
2.
Carefully open the carton and remove the enclosure on a large flat surface that is clean
and free of dirt.
3.
Check over the parts included in the carton with the parts list shown below:
Adhesive Velcro Hook Strips:
Soft Rear Window
“ “ “ “
8 each------------3"
“ “ “ “
2 each------------6"
“ “ “ “
2 each------------17"
“ “ “ “
1 each------------18"
Rear Window
1.
Begin by placing the two 17” adhesive strips on the top bar facing upwards on either side of the
center bar. Then hang the Rear Window on the inside as shown in the picture below.
