Falcon Foodservice Equipment Dominator Plus E3800DX, User, Installation And Servicing Instructions, Page: 10 / 23

10
INSTALLATION
Unpacking
1. Remove all packaging from the appliance.
2. Remove all plastic coating that is on the appliance by peeling them off.
3. Ensure there are no missing parts to the appliance.
4. Ensure there are no damages to the appliance.
5. Fit Lid handle using fixings supplied, and locate water inlet pipe in position in the rear
flue at the left hand side.
Siting / Clearances
CAUTION: If suiting, the necessary clearances to any combustible wall
MUST BE the largest figure given for individual appliances instructions.
If a Gully is used in the premises, ensure it covers
the highlighted area.
150mm from any combustible wall.
Well lit draught free area.
Level, Fireproof surface.
150mm
1
5
0
m
m