DISCO-B4-GLONASS H
ARDWARE
M
ANUAL
V
ERSION
1.0.3
6 HARDWARE INTERFACES
This chapter describes the hardware interfaces:
•
8pin single row connector (
Neltron 5560A-08)
•
Mounting holes
•
Audio jacks (
3.5mm and 2.5mm audio jacks)
•
4pin single row connector
(
Neltron 5561A-04)
Interface specifications
8pin single row connector
Eight-wire cable with an 8-pin connector (Neltron 5560A-08) on the end and 1
meter cable length. It consists of IN/OUT, power supply line and RX/TX.
Audio jacks
3.5mm and 2.5mm audio jacks. The 3.5mm jack is where you plug in a speaker.
The 2.5mm jack is where you plug in a microphone.
Mounting holes
6 holes for attaching it to a suitable location (use M4x30 self tapping or machine
screws,
not included
).
Fastening screw holes
12 x holes for fastening both cases together.
4pin single row connector
Four-wire cable with an 4-pin connector (Neltron 5561A-04) on the end and 1
meter cable length for connecting a MFD device to the DISCO-B4-GLONASS.
Table 5:
Interface specifications
Figure 2:
Interface specifications
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 19 of 36
