7
When using more than one hotplate at once, open a window if a mechanical extractor is
not present or working (FIG. 3).
UNPACKING THE APPLIANCE
Remove all packaging and make sure there is no damage to the appliance.
Some parts of the appliance are protected by a plastic film. This plastic film must be
removed before the appliance is used. The packaging materials should be carefully
discarded and not left within easy reach of children as they are a potential hazard.
INSTALLING THE HOB
Please ensure that your installation is carried out by a qualified LPGas certified installer.
The appliance can be fitted to a worktop with a thickness of 40mm – 50mm.
No extractor fan should be fitted closer than 650mm to the gas hob.
The side of adjacent cabinets above the hob may be lower than 650mm, provided they are
heat and steam resistant.
