Fakir T10 series, User Manual, Page: 77 / 276

Working with measurement tools 17
2. Use the joystick to go to ( Settings ).
3. Push the joystick to display the Settings menu.
4. Select Define user presets and push the joystick.
5. Select Define preset 1 or Define preset 2 and push the joystick. This displays a context
menu.
6. Select ( Add measurement ).
7. Push the joystick. This displays a submenu.
• Select ( Add spot ) to add a spot.
• Select ( Add box ) to add a box.
• Select ( Add circle ) to add a circle.
• Select ( Add line ) to add a line.
• Select ( Add delta ) to set up a differential calculation.
8. Push the joystick. This displays the measurement tool on the screen.
9. Push the joystick. This displays a context menu, where you can select one or more of
the following actions (depending on the type of tool):
• Remove the tool.
• Resize, move, center, and rotate the tool.
• Display maximum, minimum, and average values.
• Set alarms.
• Set local parameters.
• When completed, select ( Done ).
10. When all measurement tools have been added, select ( Save as preset ).
17.4 Resizing or moving a measurement tool
17.4.1 General
You can resize and move a measurement tool.
17.4.2 Procedure
Note
• This procedure assumes that you have previously laid out a measurement tool or user
preset on the screen.
• You can also move and resize the measurement tool by touching the screen.
#T559954; r. AL/37426/37426; en-US
63