3. Put the ingredients in the bowl (Fig. 15).
4. Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it (‘click’) (Fig. 16).
5. Put the pusher in the feeding tube.
6. Select the speed that corresponds with the colour of the accessory (Fig. 17).
7. When you have finished processing, turn the speed selector to 0 and unplug the
appliance (Fig. 18).
Slicing and shredding inserts
Never process hard ingredients like ice cubes with the inserts. The cutting edges of the
inserts are very sharp. Do not touch them.
1. Put the tool holder in the bowl (Fig. 8).
2. Place the metal shreddin or slicing insert in the insert holder.
• Place the opening of the insert over the shaft of the insert holder (Fig. 19).
• Push the opening of the insert over the projection on the shaft (Fig. 20).
• Press the insert onto the insert holder until it locks in position with a click (Fig. 21).
3. Place the insert holder with insert on the tool holder (Fig. 22).
4. Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it (‘click’) (Fig. 23).
5. Put the ingredients in the feeding tube. (Fig. 24)
• Pre-cut large ingredients into chunks that fit in the feeding tube.
• Fill the feeding tube evenly for the best results.
• When you have to process a large amount of ingredients, process small batches and
empty the bowl between batches.
6. Select the speed that corresponds with the colour of the accessory (Fig. 17).
7. Press the pusher lightly onto the ingredients in the feeding tube.
8. When you have finished processing, turn the speed selector to 0 and unplug the
appliance (Fig. 18).
WARNING!
Make sure the projection on the lid locks into the slot of
the bowl handle.
WARNING!
Make sure the projection on the lid locks into the slot of
the bowl handle.
MIX-SELF 1000
GB
27
Summary of Contents for MIX-SELF 1000
Page 78: ...MIX SELF 1000 AR 78 ...
