2. Put the tool holder with the desired accessory in the bowl (blade unit, kneading
accessory, emulsifying disc or the insert holder with one of the inserts). See the
appropriate section below.
3. When you use the blade unit or the kneading accessory, put the ingredients to be
processed in the bowl.
4. Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it (‘click’) (Fig. 3).
5. When you use the insert holder with one of the inserts, add theingredients through
the feeding tube and push them down with the pusher.
6. Select the speed setting that corresponds with the colour of theaccessory you
choose. See the appropriate section below.
7 When you have finished processing, turn the speed selector to 0 (Fig. 4).
Feeding tube and pusher
• Use the feeding tube to add liquid and/or solid ingredients. (Fig. 5)
• Use the pusher to push solid ingredients down the feeding tube. (Fig. 6)
Tip:
You can also use the pusher to close the feeding tube. This prevents
ingredients from escaping through the feeding tube.
Blade unit
You can use the blade unit to chop, mix, blend or puree ingredients.
1. Remove the protective cover from the blade (Fig. 7).
The cutting edges are very sharp. Do not touch them.
2. Put the tool holder in the bowl. (Fig. 8)
3. Put the blade unit on the tool holder in the bowl (Fig. 9).
4. Put the ingredients in the bowl. Pre-cut large pieces of food intopieces of approx. 3 x
3 x 3cm (Fig. 10).
WARNING!
Make sure the projection on the lid locks into the slot of
the bowl handle.
WARNING!
Always put the tool holder with the blade unit in the bowl
before you add the ingredients.
MIX-SELF 1000
GB
25
Summary of Contents for MIX-SELF 1000
Page 78: ...MIX SELF 1000 AR 78 ...
