9
ANTIFROST PROTECTION
With selectors positioned in the
picture (selector on power I or II and
thermostat on , the heating is
activated automatically if the
temperature is approaching
at 0 ° C.
AUTO SAFETY SHUTDOWN
The product has a built-in safety
device that shuts down the unit in
event of accidental overheating.
To restore the functioning of fan
heater, proceed as follows:
1) Make the switch power on (0).
2) Remove the fan heater plug from the
wall socket and allow it to cool for 10
minutes.
3) Make sure that the powder or a
blockage are not blocking the flow of
air, if necessary, clean the grids with a
vacuum cleaner.
4) After 10 minutes, re-enter the plug in
the socket and use it normally.
