Fakir nilco S 20 E, Operating Instructions Manual

Page: 40 / 56

12
Accessories
m
l
m m
n
o
Handle [ l ]
Insert the handle [ l ] of the suction hose into the larger end of
the suction tube [ m ], turning slightly.
Suction tube [ m ]
Insert the smaller end of the suction tube into the larger end
of the other suction tube, turning slightly.
Insert the smaller end of the lower suction tube, re. telescop-
ic tube, into the connection socket [n] of the floor nozzle [A],
turning slightly.
Setting the length of the suction tube
● Hold the handle with one hand.
● With the other hand, hold the collar.
● Pull or press the suction pipe to the required length.
Floor nozzle [ A ]
The approx. 28 cm wide floor nozzle can be set for vacuum-
ing carpets (bristle collar retracted) or for hard floors (bristle
collar extended) with the switch [o].
The two thread catchers in the nozzle plate pick up threads,
hairs, lint, etc. from carpets. They can easily be replaced if
necessary, since they are simply inserted into the nozzle
plate on each side of the suction opening.
Instead of the floor nozzle, you can also attach the
crevice nozzle or upholstery nozzle onto the handle of
the suction hose or onto the suction tube by turning it
slightly.
Crevice nozzle [ B ]
The crevice nozzle can be used to vacuum dirt out of deep
crevices in upholstered furniture, corners, trim, etc.
Upholstery nozzle [ C ]
The upholstery nozzle can be used to vacuum curtains, up-
holstered furniture, etc. It has a thread catcher for removing
lint and threads from the textiles.
Your vacuum cleaner is now ready for use.
C
B
A
en