Common Functions
MP-70/50
• MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
19
C
ORRECTING A MISTAKE
If you make a mistake while entering a number on the numeric keypad,
press
CLR
. Then enter the number again and press
ENTER
.
Note: If you press ENTER before correcting the mistake, the incorrect value
takes effect. You must enter the information again as instructed in the
appropriate section of this manual.
U
SING THE SHIFTED FUNCTIONS
A green background on the keypads denotes the shifted functions. You must
press and hold the
SHIFT
key to use these functions. The shifted functions
include the following:
T.O.D.
This function allows you to display or hide the time of day on the scoreboard
game clock.
On most scoreboard models, if you use the Time of Day function, the
Time of Day will show in the clock area, and the remaining scoreboard
digits will blank.
However, beginning with firmware version 2.15, the Time of Day function
can simultaneously run during a game for scoreboard types 27 and 28.
This is also true for scoreboard type 31 - but only if used with scoreboard
model number BA-7200.
To display the time of day,
press
SHIFT
+
T.O.D.
and respond with
YES
to
the prompt T.O.D. CLOCK? Y/N. The display will then
show SET TOD CLK, and either 12HR or 24HR,
whichever has been selected in the SYSTEM level of
programming.
Next, press the
CLOCK SET
key. A six-digit entry
field will appear on the bottom half of the LCD. Use the
numeric keypad to set the correct hours, minutes and
seconds then press the
ENTER
key to conclude this
process and send time of day to the scoreboard. T.O.D.
is not dependent upon the
TIME IN
switch setting. To
resume display of the game clock,
press
SHIFT
+
T.O.D.
and respond with
NO
.
BB 28.0 0:00.
T.O.D.CLOCK? Y/N
BB 28.0 0:00.
-TOD CLOCK- 12HR
BB 28.0 0:00.
SET TOD 00:00:00
BB 28.0 0:00.
SET TOD 09:27:00
BB TOD 9:27
