Fairlight Prodigy 2, User Manual

Page: 19 / 69

19
2.6 C
ONNECTING
T
HE
V
ARIOUS
E
NGINE
C
OMPONENTS
Once cabling issues have been dealt with the various Engine connections need to be made.
1 Connect an IEC Power lead to the back of the Prodigy 2 Engine.
2 Connect the 15 way D connector of a Video cable to VGA 1 connector on the System
I/O Panel on the rear of the Prodigy 2 Engine.
3 Connect the Console Controller cable to the connector on the System I/O panel
located on the rear of the Prodigy 2 Engine.
4 Connect any external SCSI drives to the external SCSI card (if fitted) and ensure that
the last device is terminated. Ensure that the SCSI I.D.'s are not in conflict with each other.
5 Connect all Synchronization cables such as LTC, Word clock, Video Black burst etc.
6 Connect all audio input and output cables to the QDC cards located on the rear of the
Prodigy 2 Engine.
7. Connect an IEC power lead to the back of the Prodigy 2 surface.
8. Connect the mix cable to the Mixer port on the back of the Engine.