Fairford synergy, User Manual

Page: 43 / 233

Synergy Series Soft Start User Manual
MAN-SGY-017. Version 01. 27/06/2016
43
37.2 Parameter Summary for Touchscreen Setup – “I/O” Category (continued)
– Group Parameter Units Range
Read /
Write
Modbus
Default
Setting User
Setting
Dec Hex
Ca
te
go
ry
–
I/
O
Analog
Outputs
Analog Output Type toggle 0–10V / 4–20mA R/W 8960 2300 0–10V
Select Function –
Off
Current
Measured
Overload
Overload SCR
P-Total
R/W 9024 2340 OFF
Scaling Level – 0 to 16,384 R/W 9088 2380 0
PTC Motor Thermistor Trip toggle OFF / ON R/W 53794 D222 OFF
3.7.3 Summary – Parameters for Touchscreen Setup – “Monitor” Category
Ca
te
go
ry
–
M
on
it
or
Group Parameter Units Range
Read /
Write
Modbus
Default
Setting User
Setting
Dec Hex
Monitoring
Line Frequency Hz 45 to 65 Read 32000 7D00 n/a –
Phase Rotation – L1-L2-L3 or L1-L3-L2 Read 32064 7D40 L1-L2-L3 –
I1 A 0 to 10,000 Read 33536 8300 0 –
I2 A 0 to 10,000 Read 33538 8302 0 –
I3 A 0 to 10,000 Read 33540 8304 0 –
Current I rms A 0 to 10,000 Read 32896 8080 0 –
V rms (Approx) V 0 to 500 Read 32960 80C0 0 –
Real Power Factor – 0 to 1 Read 33024 8100 0 –
True Power P kW 0 to 10,000 Read 34688 8780 0 –
Apparent Power S kVA 0 to 10,000 Read 34816 8800 0 –
Reactive Power Q kVAR 0 to 10,000 Read 34944 8880 0 –
iERS Saving Level % 0 to 100 Read 35008 88C0 0 –
Delay Angle degree 0° to 55° Read 22400 5780 0 –
Backstop degree 0° to 55° Read 23040 5A00 0 –
Delay Max degree 0° to 55° Read 22464 57C0 0 –
Pres PF Degrees degree 0° to 90° Read 21824 5540 0 –
Ref PF Degrees degree 0° to 90° Read 21760 5500 0 –
Start Saving Level % 50% to 80% of mtr FLA Read 21320 5348 80% –
Last Peak (Start) Current A 0 to 10,000 Read 38400 9600 0 –
HeatSink Temp °C -20°C to 80°C Read 36544 8EC0 ambient –
Motor Thermistor – 0 to 1024 Read 10432 28C0 0 –
Overload % 0 to 100 Read 33408 8280 0 –
3. Configuration and Parameters (continued)