FSBB15CH60 Motion SPM® 3 Series
January 2014
©2006 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
FSBB15CH60 Rev. C6
FSBB15CH60
Motion SPM
®
3 Series
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate
Drivers and Protection
• Low-Loss, Short-Circuit Rated IGBTs
• Very Low Thermal Resistance Using Al
2
O
3
DBC Sub-
strate
• Dedicated Vs Pins Simplify PCB Layout
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply
• Isolation Rating: 2500 V
rms
/ min.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9035 - Motion SPM 3 Series Ver.2 User’s Guide
General Description
FSBB15CH60 is a Motion SPM
®
3 module providing a
fully-featured, high-performance inverter output stage
for AC Induction, BLDC, and PMSM motors. These mod-
ules integrate optimized gate drive of the built-in IGBTs
to minimize EMI and losses, while also providing multi-
ple on-module protection features including under-volt-
age lockouts, over-current shutdown, and fault reporting.
The built-in, high-speed HVIC requires only a single sup-
ply voltage and translates the incoming logic-level gate
inputs to the high-voltage, high-current drive signals
required to properly drive the module's internal IGBTs.
Separate negative IGBT terminals are available for each
phase to support the widest variety of control algorithms.
Package Marking and Ordering Information
Figure 1. Package Overview
Device
Device Marking
Package
Packing Type
Quantity
FSBB15CH60
FSBB15CH60
SPMCA-027
Rail
10
