Rev 0.0
19
USER INSTRUCTIONS
EN
3.2.8
Switching off
At the end of the program, the dishwasher sounds a short beep and the
indi-
cator lights of the fourth and fi fth program
(ref. pr. 4, pr. 5 fi g. 3-04) fl ash.
Turn off the appliance by opening the door and pressing the
on/off button
(ref.
1 fi g. 3-02).
pr. 5
pr. 4
AUTO
3.3 Additional
functions
3.3.1
Adjusting the water softener
N.B.:
a different washing program from soak must be used to make
the following adjustment.
Press and hold down the
program delay
button (ref. 11 fi g. 3-05) until the
preset value appears followed by a dot (normally
3.
). Release the button and
then press it again and again until the required value is displayed, as indicated
in the table (see table. 3-03).
The 6 possible adjustment levels will appear in this sequence:
3., 4., 5., 0., 1., 2..
When the required value appears on the display, release the button; after
5
seconds
the appliance automatically reverts to the program delay and the
adjustment is set to the chosen value.
FIG. 3-04
