Fagor CNC 8070, Programming Manual, Page: 67 / 556

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Programming manual
CNC 8070
COORDI
NATE SYSTEM
Pl
an
e s
e
le
ct
io
n
(
G
17/
G
1
8/
G
1
9
/G
20)
3.
(S
OFT
V02.0
X
)
33
3.1.2 Longitudinal tool axis selection
The longitudinal axis of the tool may be selected using the instruction
"#TOOL AX". This instruction allows to select any machine axis as the
new longitudinal axis.
Programming
The longitudinal axis of the tool is defined using the instruction
"#TOOL AX [<axis><sign>]", where:
• The <axis> parameter sets the new longitudinal axis of the tool.
• The <sign> parameter indicates tool orientation.
+ Positive if the tool positions in the positive direction of the
axis.
- Negative if the tool positions in the negative direction of
the axis.
Both parameters MUST be programmed.
Positive orientation
(1)
(2)
(3)
#TOOL AX [X+]
#TOOL AX [Y+]
#TOOL AX [Z+]
Negative orientation
(4)
(5)
(6)
#TOOL AX [X-]
#TOOL AX [Y-]
#TOOL AX [Z-]
(1)
(3)
(2)
(5)
(6)
(4)