Fagor CNC 8070, Programming Manual, Page: 294 / 556

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Programming manual
326
CNC 8070
12.
CYCLE EDI
T
OR
Rect
angul
ar
po
cket
(S
OFT
V02.0
X
)
260
12.10 Rectangular pocket
The way the roughing and finishing blocks of this cycle are joined will
be the one previously set by the user with the instructions #HSC, G5,
G50 or G7. We recommend to use #HSC or G5 controlling the shape
of the corner with the instruction #ROUNDPAR.
Geometric parameters:
Type of corner (icon).
Square corner with icon
(a)
.
Rounded corner with icon
(b)
.
Chamfered corner with icon
(c)
.
X, Y Pocket corner.
L, H Pocket dimensions.
The sign indicates the orientation referred to the XY point.
Z Part surface coordinate.
Zs Safety plane coordinate.
P Total depth.
το
Angle, in degrees, between the pocket and the abscissa axis.
The turn is carried out on the defined corner, X,Y point.
r Rounding radius or chamfer size.
(b) (a)
(c)