Fagor CNC 8060, Manual, Page: 100 / 148

·100·
Remote modules
CNC 8060
CNC 8065
5.
(R
EF
: 1402)
RIOW REMOTE MODULES.
(CANOPEN
PROTOCOL).
5.11.1 Elements (connectors).
Analog outputs (4 outputs).
Led ·BUS·. Data bus status.
Led ·ERR·. Error at the outputs.
Green LED's. The LED turns on when transmission at the bus is
OK.
Red LED's. The LED turns on if there is an overload or a short-
circuit to ground at any of the outputs.
AO1
GND
AO3
GND
AO2
GND
AO4
GND
24 V
0 V
Signal Function
AO1 - AO4 Analog outputs.
GND Ground connection.
0 V Power supply.
24 V Power supply.
All ·GND· connectors are joined together internally.
C
A
D
B
BUS
ERR
C
A
D
B
BUS
ERR