Fagor CNC 8060, Installation Manual, Page: 630 / 698

Installation manual.
CNC 8060
CNC 8065
14.
SUBROUTINES.
Subrou
tin
e
s
associated
wi
th
M
fu
ncti
ons.
·630·
(R
EF
: 1709)
14.11 Subroutines associated with M functions.
The "M" functions may have an associated subroutine that the CNC will execute instead of
the function. If, within a subroutine associated with an "M" function, the same "M" function
is programmed, the CNC will executed this, but not its associated subroutine.
14.11.1 Configure the subroutines.
Assign the subroutine to the function.
Name and location of the subroutine.
These subroutines must be defined in the “M” function table, in the MPROGNAME field and
saved in the folder ..\Mtb\Sub.
14.11.2 Variables.
The following variables may be accessed from (PRG) the part-program and from the
MDI/MDA mode, PLC and (INT) from an external application. For each variable, the table
indicates whether the access is reading (R) or writing (W).
Syntax.
·pos· Position inside the "M" function table.
Parameter. Meaning.
MPROGNAME FUNM Name of subroutine associated with M function.
[FUNM] .... Machine parameters; M function table.
Variable. PRG PLC INT
(V.)MPM.MPROGNAME[pos]
Name of subroutine associated with M function.
Units: Text.
- - R
MPM.MPROGNAME[12]
Position ·12· of the "M" function table.