Fagor CNC 8060, Installation Manual, Page: 621 / 698

Installation manual.
CNC 8060
CNC 8065
SUBROUTINES.
14.
Sub
ro
u
tine associ
ated with 805
5-MC
a
nd 805
5-TC
pro
g
rams
(subro
u
ti
nes 999
8 and 99
99).
·621·
(R
EF
: 1709)
14.4 Subroutine associated with 8055-MC and 8055-TC programs
(subroutines 9998 and 9999).
In order to be able to execute programs of the 8055 MC/TC, the CNC must have two
subroutines called 9998 and 9999 written in 8070 CNC language. Each program in the
language of the 8055 MC/TC has a call to the corresponding subroutine at the beginning
and at the end.
Both subroutines must be defined, even if no operation is to be carried out at the beginning
or at the end of the part-program, in which case the subroutines will be empty (except for
the end-of-subroutine block). If any of these subroutines are missing, the CNC will issue an
error message every time when trying to execute a 8055-MC or 8055-TC part-program.
14.4.1 Configure the subroutines.
Name and location of the subroutine.
The name of the subroutines is 9998 and 9999. Both subroutines must be saved in the folder
path indicated by the general parameter SUBPATH. All channels use the same subroutines.
Subroutine. Meaning.
9998 Routine that the CNC will execute at the beginning of each program
of the 8055-MC and 8055-TC.
9999 Routine that the CNC will execute at the end of each program of the
8055-MC and 8055-TC.
Parameter. Meaning.
SUBPATH CHN This parameter indicates the directory, by default, for the user
subroutines and the necessary subroutines to execute 8055-
MC and 8055-TC programs.
[CHN] ....... General machine parameter of the channel.