Fagor BCSD, Installation Manual

Page: 30 / 58

·30·
Installation manual
BCSD
System
3.
CABLES
R
EF
. 1711
Co
nne
ctio
n betwee
n
CNC and SCD spin
dle
dri
v
e
3.1 Connection between CNC and SCD spindle drive
Cable name: BSC-CS-XX-01
Cable between CNC Communications board CAN AXES connector and spindle drive SCD X6
connector.
Length: 5 m - 10 m - 15 m.
Pinout.
2 x 5-pin male Phoenix minicombicon connector (3.5 mm pitch).
Characteristics of the CAN cable:
Type: Shielded.
Twisted pairs (1 x 2 x 0.22 mm2).
Flexibility: Superflexible.
Minimum static bending radius of 50 mm and a dynamic radius of 95 mm.
Cover: PUR.
Impedance: Cat.5 (100 W - 120 W).
Signal Description
ISO GND Ground / 0 V.
CAN L Bus signal (LOW).
SHIELD CAN shield.
CAN H Bus signal (HIGH).
SHIELD CAN shield.
ISO GND
CAN L
SHIELD
CAN H
SHIELD
1
2
3
4
5
1
2
3
4
5
Pin Pin
ISO GND
CAN L
SHIELD
CAN H
SHIELD