Fagor 8025 M CNC, Translation Of The Original Manual

Page: 137 / 180

Remote modules.
CNC 8060
CNC 8065
RCS-S-4F4
AO (SERCOS-II
PROTOCOL).
7.
Ha
rd
ware function
ality.
Co
nne
ctors.
·137·
(R
EF
: 1906)
·I37B· general purpose ±10 V analog outputs (16 bits).
7.6.2 Pinout and connector characteristics (lower end).
·H53· RS232 serial line.
Simple RS232 communication (only RX and TX) for updating the module.
Connector data.
Number of poles. 2.
Pitch. 3.5 mm.
Connection technique. Spring connection.
Minimum/maximum section. 0.2 / 1.5 mm².
Rated current In. 8 A.
Cable data.
Length to be stripped. 10 mm.
Plug-in part 2 identical connectors 2-pole Phoenix-contact
minicombicon connector (3.5 mm pitch). Rated current; 8A.
• Left connector.
• Right connector.
• Both connectors.
Pin. Signal. Function.
1 11 0 V reference signal.
2 AO3 Analog output.
Pin. Signal. Function.
1 11 0 V reference signal.
2 AO4 Analog output.
1
Plug-in part 9-pin female SUB-D HD connector.
Pin. RS232 signal.
1 DCD
2 RxD
3 TxD
4 DTR
5 11
6 DSR
7 RTS
8 CTS
9 RI
1 ... 5
6 ... 9