Fagor 8025 M CNC, Translation Of The Original Manual

Page: 113 / 180

Remote modules.
CNC 8060
CNC 8065
RIOR REMOTE MODULES.
(CANOPEN
PROTOCOL).
6.
Di
me
nsion
s
a
nd mountin
g of the modu
le.
·113·
(R
EF
: 1906)
6.1 Dimensions and mounting of the module.
Module dimensions.
DO NOT make any connection or connect any module to the power supply while the latter is turned
on. Before making any connection, turn the power supply off by unplugging the power cable.
The RIOR module, meeting the standard EN 60529, corresponds to the IP00 classification, so it must
be mounted inside an electrical cabinet that provides at least IP54 protection.
Db b
a
Da
c
mm inch
Da 120 4.72
Db 256 10.08
mm inch
a 150 5.90
b 272 10.70
c 36.50 1.44
Ra R 3.50 R 0.14
Rb R 6.50 R 0.26
Ra
Rb
Ra