Factor IR-KIT-36K, Installation Instructions

Page: 1 / 3

IR-KIT-36/56K Repeater System
Thank you for purchasing the Factor Electronics IR-KIT-36/56K which can be
used to controlling up to 8 IR-controllable A/V devices behind using your
existing IR remote controls.
SYSTEM CONTENTS:
(1) IR-CONN-BLK
IR CONNECTION BOX …………….…………………………………………………….1PC
(2)IR-REP-36/56K
Dual-band IR RECEIVER……………………………………………………………..…1PC
(3) IR-2-FLASH
DUAL IR blinking emitter …………………………………..…………………….……2PCS
(4) IR-PWR-12V/500
12V/500mA switching power ……….……………….…….…………………….….1PC
INSTALLATION DIAGRAM & MOUNTING INSTRUCTIONS:
MOUNTING INSTRUCTION
(Refer to the installation diagram):

Mount the IR-CONN-BLK IR connecting box behind AV devices and near an AC
outlet.

Connect the IR receiver IR-REP-36/56K to the IR-CONN-BLK connecting box.
Position the IR receivers in a location which is “line of sight” to your IR remote
controls.

Plug the IR-2-FLASH emitters into the IR-CONN-BLK connecting box and
attach the emitter directly on top of the component’s IR sensors.

The IR-PWR-12V/500 power DC adaptor plugs into a voltage compliant AC
outlet and connects to the “POWER” receptacle of the IR-CONN-BLK
connecting box. Make sure the POWER LED indicator is “ON green” to confirm
The unit is ready for operation.
INSTALLATION DIAGRAM
CD PLAYER 1
CD PLAYER 2 DVD PLAYER 1
L
R
1
2
3
IR RECEIVER
SPEA KERS
TERMINAL BLOCK
IR
V+
G
RPT
PWS
1
2
4
REMOTE
DC 12V
Pow er A m p lifier
V+
：
With SOLID STRIPE
MARKING in GREY
G
：
No any marking
IR
：
With DASH
MARKING in GREY
V+
：
With SOLID STRIPE
MARKING in GREY
G ： No any marking
IR ： With DASH
MARKING in GREY
BACK VIEW
FOR THE CODING & DEFINITION
EMITTER_Dual
3
3
EMITTER_Dual
IR WINDOW
NOTE:

If a power supply is not connected to the status power receptacle on the
IR-CONN-BLK connecting box, the status LED’s will not function. The status
power adaptor is not included in this kit. However the IR will function.