Page
6
with
23
Page
6
with
23
Page
6
with
23
Page
6
with
23
MANUAL - KRAMER Technik MIG / MMA 185
2. DESTINY
2. DESTINY
KRAMER equipment technician MIG / MMA 185 for manual arc welding
in the GMAW (Gas Metal Arc Welding) - MIG / MAG and MMA (Metal Manual Arc Welding).
3. DESCRIPTION OF THE DEVICE
3. DESCRIPTION OF THE DEVICE
KRAMER technician MIG / MMA 185
Suitable for single-phase mains 230V, 50 / 60Hz. The device has, continuous adjustment of the welding current and is
equipped with thermal overload protection system to prevent overheating.
KRAMER MIG 185 is equipped with functions option electrode welding MMA and additionally has the ability to
self-shielded welding wire FCAW (Flux).
4. TECHNICAL DATA
4. TECHNICAL DATA
Table 1.
Technical data
Parameter
KRAMER MIG / MMA 185
Voltage [V]
1 ~ 230
Current frequency [Hz]
50/60
Tolerance variations in the power [%]
± 10
Protection [A]
16 / 230V
Power consumption [KVA]
5.5
Rated output voltage [V]
16.5 - 23
Load voltage [V]
58
MIG Welding current range [A]
30 - 160
Welding current range MMA [A]
30 - 160
Output voltage regulation ego
Output voltage regulation ego
smooth
Duty cycle MIG / MAG
60%
160A
100%
128A
Duty cycle MMA
60%
160A
100%
128A
The diameter of the welding wire [mm]
0.6 - 0.8
type of feeder
2R
insulation class
F
Level of security
IP21S
Mass [kg]
6.5
Dimensions [mm]
310x230x135
