FabWeaver A530, User Manual

Page: 84 / 120

Maintenance
5
-2
5
1. Product Cleaning
1.1 Internal Cleaning
Chamber Internal Cleaning
Filament residues may fall on the bottom of the chamber when it is in operation. If the filament residues are not
removed, they may affect the printer’s operation. Clean the inside regularly.
Front Door Glass Cleaning
While using the product, stains may occur due to dust adhering to the glass surface of the front door, fingerprints,
or moisture due to temperature difference. If your web monitor camera screen looks blurry, it may be due to
contamination on the glass surface.
Use a soft, clean cloth or cleaning tissue to remove stains and fingerprints from the glass surface. If the stain is
difficult to remove, gently wipe is with a soft cloth lightly moistened with a small amount of distilled water, ethanol,
or lens cleaner. During this process, use a dry cloth to remove any water marks remaining on the surface.