- page
1
of
5
-
L-SERIES CLUTCHES
INSTALLATION INSTRUCTIONS
Thank you for purchasing your new L-Series Clutches. They
have been custom-made from the highest quality materials.
to the dimensions you specified. With the proper installation
and care, it will provide you with many years of beauty and
trouble-free use.
Please read all instructions before you start so you will be
familiar with the overall process.
Make sure you measure your window to ensure the clutches
and shades will fit properly before beginning.
Getting Started
Remove the clutch and shade from the packaging. Keep the
packaging until you have successfully installed the clutch and
the shade.
TOOLS REQUIRED
FASTENER NOTES
For outside mount, it is best to attach the bracket to wood
studs. If this is not possible, you will need to purchase special
fasteners (see illustration below for examples).
Here are some HELPFUL TIPS:
• If you are using a special fastener, make sure it is
designed to support the weight of the clutch and shade.
Follow the fastener manufacturer’s instructions carefully.
• When drilling into drywall or plaster, use a fastener
designed for hollow wall applications (see illustration).
• When drilling into concrete, stone, brick, or tile, use
appropriate plugs, anchors, or screws (not included).
• When drilling into metal, the included screws are sufficient.
Pre-drill
¹⁄₈
” holes.
Molly Bolt
Hollow Wall Anchor
Anchor
L-SERIES CLUTCHES
INSTALLATION INSTRUCTIONS
(for L32, L32 PLUS, L40, L40 PLUS,
and L45, L45 PLUS Clutches)
• Pencil
• Power Drill with the following bits:
• Awl
-
¹⁄₁₆
” Drill Bit
• Tape Measure
-
¹⁄₄
” Hex Driver
• Level
- Standard Screwdriver
• Ladder or Stepstool
- Masonry Drill Bit (if drilling into
concrete or brick)
