FabLab Mendel Quick Start Manual Download Page 1

 

806 Montana Ave. El Paso, TX 79902 

fablabelpaso.org 

Ÿ

 915.209.2656 

Ÿ

 [email protected] 

   

   
   

Mendel 3D Printer 

 

ABOUT

 

 
Welcome, new user! Mendel is an open-source Cartesian 3D printer. It is part of 
the RepRap line of self-replicating 3D printers. It uses fused deposition modeling 
to build up three-dimensional objects by injecting thin layers of melted plastic. 

 

SPECIFICATIONS

  

 

T

ype: Cartesian printer 

Repeatability: better than 0.03 mm (30 micron) 
Build volume: 200 mm x 200 mm x 160 mm 

 

SAFETY GUIDELINES 

 

1.

 

Please carefully read all the instructions before attempting to operate the 
3D printer. 

2.

 

NEVER

 operate or test the 3D printer without proper ventilation in the area 

3.

 

NEVER

 touch the hot end of the printer. It is usually around 200°C and will 

cause severe burns. 

 

PRECAUTIONS 

 

1.

 

DO NOT

 make 

any 

modifications to the Mendel or safety features of the 

Mendel. Doing so is strictly prohibited.  

2.

 

DO NOT

 attempt to use any other type of filament or print material other 

than what is provided or approved by the staff.

 

3.

 

DO NOT

 

 place hand or any other body part in the print area.

 

4.

 

AVOID

 breathing near the hot end where the plastic is being melted.

 

Reviews: