806 Montana Ave. El Paso, TX 79902
fablabelpaso.org
915.209.2656
Kossel Mini 3D Printer
Usage Guidelines
Congratulations! After carefully reviewing the
Safety Guidelines
, you are now
ready to set up the machine for printing.
SETUP
1.
Turn on Kossel Mini by turning
red
e-stop button on top of the machine.
2.
Open Repetier Host.
3.
Establish a connection to the printer.
4.
Click Home All to home the printer.
5.
Turn on the heat to the extruder to warm the hotend at 170 °C.
FILE PREP
1.
Open STL file in KISSlicer.
☝
The default settings will print well under most circumstances. You
may edit the print parameters but print quality may suffer.
2.
Click Slice.
3.
After slicing, click Save.
PRINTING
1.
Load g-code into Repetier Host.
2.
Click Run to begin printing.
3.
The effector will lower and pause so that you can deploy the Z probe.
