FabiaTech Low Power FB2503, User Manual

Page: 46 / 85

FabiaTech Corporation
40
Hard Disk Power Down Mode
This field specifies the power conserving state that the hard disk drive enters after the
specified period of hard drive inactivity has expired.
Available Options: Disabled, Standby, Suspend
Default setting: Disabled
Standby Time Out (Minute)
This field specifies the length of a period of system inactivity (like hard disk or video)
while in full power on state. When this length of time expires, the system enters
Standby power state.
Available Options: Disabled, 1 Minute, 2 Minute, 4 Minute, and 8 Minute, up to 60
Minute.
Default setting: Disabled
Suspend Time Out (Minute)
This field specifies the length of a period of system inactivity (like hard disk or video)
while in Standby state. When this length of time expires, the system enters Suspend
power state.
Available Options: Disabled, 1 Minute, 2 Minute, 4 Minute, and 8 Minute, up to 60
Minute.
Default setting: Disabled
Throttle Slow Clock Ratio
When the system enter Suspend or standby mode, the CPU clock runs only part of the
time. You may select the percent of time that the clock runs.
Available Options: 0%-6.25, 25%37.5%, 75%87.5% and 93.75%-100%
Default setting: 50%-56.25%
IRQ3 ~IRQ15
This field specifies the power down mode of the system based on the device. When
the system does not receive signals from the device, it will enter the Power Down
mode immediately. To enable the power saving mode, select Monitor. To disable it,
select Ignore.
Resume On RTC Alarm
This field specifies the RTC alarm to be turned off by extra software.