Version 1.2
FB2412 Series User’s Quick Setting
Page 1/3
www.fabiatech.com
©2009-2018 FabiaTech Corporation
1. Brief
The FB2412 is an all-in-one, PC/104, DMP Vortex low power CPU module. This user’s quick setting
provides the jumper settings, connector location, and their pin assignment.
2. Board Placement
SW1
CN5
CN9
J3
J5
CN6
BUS1
JP2
BT1
CN2
CN1
CN12
JP1
J6
J4
CN11
J1
JP3
JP4
JP5
CN4
CN3
CN7
CN8
U1
U11
U3
U2
CF1
J2
3. Packing List
1 FB2412x all-in-one PC/104 CPU board.
1 VGA (CRT interface) adapter cable.
1 44-pin hard disk drive interface cable. (
Optional
)
2 serial port adapter cables.
1 PS/2 keyboard and mouse port adapter cable.
1 10-pin LAN adapter cable with FB4605A transfer board.
1 compact disc includes software utilities and manual.
4. Features
*
On-board 800 MHz DMP Vortex CPU, fanless operation.
*
On-board 128MB DDR2 RAM.
*
One 10/100 base-TX Ethernet port.
*
Provides VGA and TTL/LVDS LCD (optional) with up to 4MB memory.
*
2 RS-232, 2 USB ports, 1 CF socket, and 1 PCI IDE interface.
*
PS/2 compatible keyboard and mouse interface.
*
Provides header for external speaker and hard disk access LED.
*
Programmable watchdog timer and Flash BIOS with easy upgrade utility.
*
Power re5V only, 3A maximum.
*
PC/104 form factor, 90.2 mm x 95.9 mm (3.55” x 3.775”)
5. Connectors and Jumpers List
Name
Function
Name
Function
CN1 44-pin IDE Connector (44-pin IDC)
J1
USB #1 & #2 Connector (J2*5)
CN2* SATA Connector (optional)
J2
Reserved Header
CN3 COM1 Connector (10-pin IDC)
J3
External Speaker Header (J1*2)
CN4 COM2 Connector (10-pin IDC)
J4
KB/MS Connector (6-pin JST)
CN5 TTL I/O Connector (5-pin JST)
J5
Reset Header (J1*2)
CN6 Power Connector (4-pin)
J6
LAN Connector (10-pin JST)
CN7 VGA Connector (10-pin IDC)
JP1
CF Master/Slave Select (J1*3)
CN8* TTL LCD Connector (40-pin DF-13)
JP2
External Hard Disk LED Header (J1*2)
CN9* LVDS Connector (30-pin DF-13)
JP3/JP4 COM2 RS-232/485 Select (J3*3)
CN10* LCD Power Connector (5-pin JST)
JP5
RS-485 Terminator Select (J1*3)
CN11* LPT Connector (26-pin IDC)
BUS1 Stack-Through PC/104 Connector
CN12* Floppy Connector (20-pin IDC)
LED1
On-board PW/WD LED (Green)
CF1 CompactFlash Socket
SW1* Panel Rype Select Switch (Optional)
Note: Connectors with * mark are optional items.
6. Connectors, Headers and Their Relative Jumpers
A. Reset Header (
J5
)
J5 is a 2-pin header for connecting to system reset bottom. Close these 2 pins to hardware reset
FB2412 and restart system booting.
