6.
Attach two (2) 22848 cross pieces to front and rear of rack. Ensure center connector pieces face
into the center of the rack. (Figure 4) Attach 22849 to center of rack. Use six (6) ¼” Stainless Steel Cap head
bolts, twelve (12) stainless flat washers, and six (6) stainless nuts per cross piece. Do not tighten hardware
at this time.
7.
Attach 22850 & 22851 middle c-channel section to cross pieces installed in step 3. (Figure 5) Use six
(6) ¼” Stainless Steel Cap head bolts, twelve (12) stainless flat washers, and six (6) stainless nuts per piece.
Tighten hardware installed in step 3.
