Fa-Ga SAMURAI B 200, Assembly And Operating Instructions Manual

Page: 10 / 45

WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
WMV-Dresden WMV-Dresden WMV-Dresden WMV-Dresden
- 10 - - 10 -
Safety and protection
Description
1. Quality mark in compliance with the EC Directive 98/37/CE
2. Serial production number
3. Tractor model
4. Engine (model dependent)
5. Rated power
6. Number of revolutions per minute
7./8. Weight and production year
9.
CE statement of conformity as per EC Directive 84/538/CERead
Read the instructions/max slope 13°/ Wear hearing protection
A safety label is sticked on the mower chassis below the seat to remind the operator to
read the instructions before use, to ride up and down a max 13° slope and to wear
hearing protections during work.
Read the instructions
Make yourself familiar with safety and operating instructions of the manufacturer before use.
Max slope 13°
The mower can strictly handle a max up and down slope of 13°! Make sure to check the
ground conditions for hidden hazards before starting riding your mower.
Wear hearing protection
Always wear safety hearing protection while mowing.
General safety / hot parts danger
A warning transfer „General safety/hot parts danger“ is located on each side of the chas-
sis beneath the engine read-through cover lid.
Maximum caution should be taken in handling any turning/moving part of the machine
that is more likely to become hot. Only inspect and maintain these area after stopping
the engine and leaving the mower rest still long enough for all parts to cool down.
Cuttig blade danger
A cutting blade danger sign is located on the cutting deck.
Before leaving the mower unattended make sure to stop the blades.
DO NOT put
your hands or feet into or under the cutting deck and never try to clear or work on the
discharge chute while the blade is rotating. Operators should make sure that no bystan-
ders are within a minimum range of 10 meters from the mowing tractor.
Manufacturer‘s identification and specifications
The manufacturer‘s identification label is located on the chassis under the operator‘s
seat and reports all main specifications including serial production number of your
mower. Make sure to refer to this number in all your future orders for spare parts, service
or other correspondence with the manufacturer.
Model:
Engine:
Power (kW/PS):
Noise level:
Weight:
CE Applicable
Standards:
Production year:
100 dB(A) at 2800 RPM
WMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte