F5 VIPRION 4800 Series, Platform Manual, Page: 28 / 110

Additional equipment for installing the VIPRION 4800 AC chassis
This additional equipment is required to install the VIPRION
®
4800 AC chassis.
Hardware Quantity
12 AWG copper ground wire (color code insulation, as required) 1
Two-hole grounding terminal lug, 0.27 inch (0.69 cm) holes on 0.63 inch (1.60 cm) centers 1
Crimping tool for the ground wire (if crimp-style lug is used) 1
2.5 mm hex socket wrench (for two-post installations only) 1
20 inch-pound-capable torque wrench (for two-post installations only) 1
Hardware included with the VIPRION 4800 DC chassis
The VIPRION
®
4800 DC chassis should include all of the hardware components listed here.
Hardware Quantity
DC connectors 4
Quick-install rack mount kit (includes left hand and right hand brackets) 1
Rack mount brackets (left and right) 2
M4 x 10MM socket screws 12
Thumb screws 8
Front bezel (with LCD component) 1
#2 Phillips head screwdriver 1
Cable managers 2
Hook and loop straps 16
Cable ties (for power cable dressing) 8
Additional equipment for installing the VIPRION
®
4800 Series DC chassis
This equipment is required to install the VIPRION
®
4800 Series DC chassis:
Hardware Quantity
Rack-mounted power disconnect 1
2 AWG copper ground wire 1
2 AWG copper wiring leads for four power supplies 8 (minimum)
Two hole grounding terminal lug, 2 AWG, .27 inch (.69 cm) holes on .63 inch (1.6 cm)
centers 1
28
Platform Installation