F5 VIPRION 2400 Manual Download Page 40 | Manualshive

Page: 40 / 86

background image

About cluster management

The management IP address for a cluster is known as the cluster IP address. The cluster IP address enables
you to access the browser-based Configuration utility to configure other aspects of the product, such as the
product license, VLANs, trunks, and so on. Connecting to the cluster IP address connects you to the primary
blade in the system.

With VIPRION

®

platforms, you assign cluster IP addresses on a per-cluster basis. Initially, all blades installed

in the chassis belong to a single default cluster. During the initial setup, you only need to assign a single
cluster IP address.

A blade within a cluster is known as a cluster member. You can assign a management IP address to each
cluster member.

You can manage clusters using these methods:

•

USB LCD module

•

config

utility

•

tmsh

commands

Configuring the cluster IP address from the LCD

You can use the USB LCD module to configure the cluster IP address. The options for cluster and blade
management are located in the Cluster menu item under the System menu.

Note: The USB LCD module is an optional device that is not included with the platform by default. It works
only with VIPRION

®

2000 Series platforms.

Note: When using the LCD to manage clusters, be sure to use the Commit menu option after changing each
setting. Alternatively, you can change all cluster-related settings and use the Commit option to save all
settings at once.

1.

Press the X button to access the LCD menus.

2.

Use the arrow keys to select

System

and press the Check button.

3.

Use the arrow keys to select

Cluster

and press the Check button.

4.

Use the arrow keys to select

Cluster Mgmt

and press the Check button.

5.

Use the arrow keys to select

Cluster IP

and press the Check button.

The LCD panel shows the current IP address of the cluster. The default value is

192.168.1.246

.

6.

Use the arrow keys to configure the IP address of the cluster.

7.

Press the X button until you return to the

Cluster Mgmt

menu.

8.

Use the arrow keys to select

Commit

and press the Check button.

The system saves the new IP address for the cluster. You can now access the browser-based Configuration
utility using the cluster IP address you assigned.

Configuring the cluster IP subnet mask from the LCD

You can use the LCD module to configure the cluster IP subnet mask.

40

Platform Installation

«
...
38
39
40
41
42
...
»

Summary of Contents for VIPRION 2400























































































Reviews:

No comments

Related manuals for VIPRION 2400

Brand: Omnia Pages: 6

Brand: Quantum Pages: 20

Pixie-4 Express

Brand: XIA Pages: 17

LoadMaster 1500

Brand: KEMP Technologies Pages: 71

Brand: Tektronix Pages: 178

Brand: Renesas Pages: 2

Brand: OPTO 22 Pages: 28

Brand: IBA Pages: 36

MICROSPACE MSEBX800

Brand: DIGITAL-LOGIC Pages: 53

WISENET XRN-1610

Brand: Hanwha Techwin Pages: 88

Brand: Proxim Pages: 65

Brand: Sun Microsystems Pages: 410

WIRELESS-G CARDBUS PC CARD - GUIDE D

Brand: Hawking Pages: 26

Brand: QSC Pages: 4

Brand: StarTech.com Pages: 13

Brand: Ubiquiti Pages: 12

Brand: Ublox Pages: 52

UniFi US-48-500W

Brand: Ubiquiti Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands