manualshive.com logo in svg

F5 VIPRION 2400, Manual, Page: 29 / 86

Share
Download
F5 VIPRION 2400 Manual Download Page 29

Figure 8: Pre-installed mounting brackets on the chassis

The chassis is designed for 19-inch racks. If you are installing into a wider rack, you will need to provide
adapters. The four-point rack mounting rail kit will not work with 23-inch racks.

Caution: If you have not yet removed the chassis from the shipping box, F5

®

Networks highly recommends

that you have at least two people remove the chassis from the box. This ensures your safety and prevents
damage to the chassis.

Caution: Do not attempt to lift the enclosure by means of the fan tray module. In the process of doing so,
the fan tray will pull free from the unit, with the potential of damaging the remaining chassis and fan tray.

Important: Before you install this platform, review the environmental guidelines to make sure that you are
installing and using the platform into a compatible rack and in the appropriate environment.

Important: This product is sensitive to electrostatic discharge (ESD). F5

®

Networks recommends that you

use proper ESD grounding procedures and equipment when you install or maintain the unit.

About the two-point rack mounting brackets

You can use the two-point rack mounting brackets if you are installing into a two-post rack.

The two-point rack mounting brackets are pre-installed on the chassis.

Note: You should use the two-point rack mounting brackets to install the platform only if you are installing
into a two-post rack. For installing the platform into all other types of racks or cabinets, you should use
the four-point rack mounting rail kit.

Installing the chassis into a two-post rack

Before you install this platform, review the environmental guidelines to make sure that you are installing
and using the platform in the appropriate environment.

29

Platform Guide: VIPRION

®

2400

Summary of Contents for VIPRION 2400























































































Reviews:

No comments