F5 Herculon SSL Orchestrator, Setup

Page: 36 / 58

You have now imported a new configuration into Herculon SSL Orchestrator.
Importing past configurations for deployment
Before you import past configurations for deployment, complete all areas in General Properties. Refer to
the
Configuring general properties section of this document for more information.
Before deploying a configuration, you can roll back to previously successful deployment configurations
and examine any differences between the current configuration and the past configuration.
1. On the Main tab, click SSL Orchestrator > Configuration , and on the menu bar, click Settings >
Import Configs to view import configuration settings.
The Import Configurations screen opens.
2. From the Import Configurations From list, select Past Deployment .
The screen lists previously saved deployments.
3. Select a previously saved configuration to import.
4. Click Update .
An automatically generated JSON dialog box opens, asking
Do you wish to rollback your
SSL Orchestrator configuration settings?
. The current configuration and the past
configuration display next to each other, and show any configuration differences that might be found
between the two files. Make sure to review all of the differences between the two files to verify that
this is the configuration you want to import.
5. To import the contents of the past deployment, click OK , or click Cancel to stop the import process.
6. Click Deploy to deploy the past configuration into Herculon SSL Orchestrator.
A Deploy Comments popup dialog box opens where you can enter information specific to the
successfully deployed past configuration.
You have now deployed a past configuration into Herculon SSL Orchestrator.
Exporting configurations for deployment
Before you export configurations for deployment, complete all areas in General Properties. Refer to the
Configuring general properties section of this document for more information.
You can export previously successful deployment configurations as JSON files and examine
configuration settings prior to exporting it to your local system. Exported JSON files can later be
imported and used to deploy configurations in other Herculon
™
SSL Orchestrator environments.
1. On the Main tab, click SSL Orchestrator > Configuration , and on the menu bar, click Settings >
Export Configs to view export configuration settings.
The Export Configurations screen opens.
Note: If you do not have any previously saved deployments, no information displays.
2. From the Export Configurations table, select a previously deployed configuration.
3. Click Export .
A dialog box popup opens showing the JSON configuration information to be exported, and asks
Do
you wish to export the current SSL Orchestrator Configuration
settings to a .json file?
.
4. To export the current Herculon SSL Orchestrator settings into a JSON export file, click OK , or click
Cancel to stop the export process.
5. Type the filename of the JSON file to export.
6. Click OK .
Importing and Exporting Configurations for Deployment
36